Product Description

InTENSity Micro Combo Dual Channel TENS Unit and Micro Unit with AC Adapter
TENS Nerve Stimulation with added Muscle Stimulation

How Electronic Muscle Stimulation works:

Electronic Muscle Stimultion is an internationally accepted and proven way of treating muscle injuries. It works by sending electronic pulses to the muscle needing treatment; this causes the muscle to exercise passively. Electronic Muscle Stimulators (EMS) Stimulate, Re-educate, Massage, and Build Muscle. Electronic Muscle Stimulation is basically done by stimulating some areas of the body. For this purpose, an electronic stimulation device is used - electrode pads are placed directly on the body area(s) that need to be stimulated. By dialing the voltage, you can pick different pressure on the muscles, that create various medical and cosmetic effects.

Dual Channel InTENSity Micro Combo Unit
Transcutaneous Nerve Stimulator TENS Unit
Electrical Muscle Stimulator EMS Unit
Comes with set of electrodes / ac adaper (plug-in) included
Pain control / edema reduction / spasm reduction

How Transcutaneous Electrical Nerve Stimulation works:

Transcutaneous Electrical Nerve Stimulation (TENS) is a non-invasive, drugfree method of controlling pain. TENS Units use tiny electrical impulses sent through the skin to nerves to modify your pain perception. In most people it is effective in reducing or eliminating the pain, allowing for a return to normal activity. In many people, the reduction or elimination of pain lasts longer than the actual period of stimulation (sometimes as much as three to four times longer). In others, pain is modified while stimulation actually occurs.Unit overrides the pain signal to the brain by sending a comfortable electronic impulse. When the TENS Unit overrides the pain signal, it "tricks" the brain into thinking their is NO PAIN. This produces Fast and Rapid Pain Relief, usually within a minute or two. You can control and customize the intensity, pulse rate, and pulse width to "experiment" and find the best setting for your pain relief.

View the full operations manual: Micro Combo Operations Manual

Questions: Manufacturer 1-800-871-7858 or www.CurrentSolutionsNow.com

Features:

The Intensity™ Micro Combo is the microcurrent device you have been looking for. This unit has 2 waveforms: Microcurrent and Tens. There are 4 modes of Tens and the microcurrent is adjustable from 0 to 700uA. Comes with set of electrodes / ac adaper (plug-in) included.

Wave Form:
- Tens - Monophasic Square
- Microcurrent - Monophasic Square
Pulse Rate:
- Tens - 1-150 Hz
- Microcurrent - 1-150 Hz
Pulse Width:
- Tens - 50-300us
- Microcurrent - 2-200mS
Output Voltage:
- Tens - Constant Current
- Microcurrent - Constant Current
Current:
- Tens - 0-100mA
- Microcurrent - 0-700ua
Modes:
- Tens - 4
- Microcurrent - 3
Timer:
- Tens - 1-60 Constant
- Microcurrent - 1-60 Constant

Uses:

Relaxation of muscle spasms
Prevention of muscle retardation of disuse atrophy
Increasing local blood circulation
Muscle re-education
Immediate post-surgical stimulation
Maintaining or increasing range of motion

Package Includes:

Stimulator
Lead Wires (New FDA compliant)
4 Self-stick Hypoallergenic Reusable Electrodes
Battery
Carrying Case
Instruction Booklet

Directions:

Clean the skin thouroughly
- Proper skin care will help make your IF program more comfortable and trouble-free.
Check Battery
- Be sure you are using a fresh battery
- A/C hook-up is preferred and battery is for short term emergency care only.
Prepare Electrodes
- Follow the instructions included in the electrode pads you choose
Connect The Electrodes to the Lead Wires
Place Electrodes on Skin
- Apply the electrodes to the exact site indicated by your physician following the instruction included with the electrode system. Make sure that the electrodes are placed firmly to the skin making good contact between the skin and the electrodes.
Connect Lead Wires to the Output Sockets
- The InTENSity Select Unit is supplied with two twin lead wires. When applying only one pair of electrodes, plug the dual connector into the socket "Channel 2" and the electrode switch is set in the "Two Electrodes" position. Use both sockets when applying two pairs of electrodes.