InTENSity Twin Stim III Combo Dual Channel TENS Unit and EMS Unit
TENS Nerve Stimulation with added Muscle Stimulation

How Electronic Muscle Stimulation works:

Electronic Muscle Stimultion is an internationally accepted and proven way of treating muscle injuries. It works by sending electronic pulses to the muscle needing treatment; this causes the muscle to exercise passively. Electronic Muscle Stimulators (EMS) Stimulate, Re-educate, Massage, and Build Muscle. Electronic Muscle Stimulation is basically done by stimulating some areas of the body. For this purpose, an electronic stimulation device is used - electrode pads are placed directly on the body area(s) that need to be stimulated. By dialing the voltage, you can pick different pressure on the muscles, that create various medical and cosmetic effects.

  • Dual Channel Interferential InTENSity Select Combo Unit
  • Transcutaneous Nerve Stimulator TENS Unit
  • Electrical Muscle Stimulator EMS Unit
  • Comes with set of electrodes / ac adaper (plug-in) included
  • Pain control / edema reduction / spasm reduction

How Transcutaneous Electrical Nerve Stimulation works:

Transcutaneous Electrical Nerve Stimulation (TENS) is a non-invasive, drugfree method of controlling pain. TENS Units use tiny electrical impulses sent through the skin to nerves to modify your pain perception. In most people it is effective in reducing or eliminating the pain, allowing for a return to normal activity. In many people, the reduction or elimination of pain lasts longer than the actual period of stimulation (sometimes as much as three to four times longer). In others, pain is modified while stimulation actually occurs.Unit overrides the pain signal to the brain by sending a comfortable electronic impulse. When the TENS Unit overrides the pain signal, it "tricks" the brain into thinking their is NO PAIN. This produces Fast and Rapid Pain Relief, usually within a minute or two. You can control and customize the intensity, pulse rate, and pulse width to "experiment" and find the best setting for your pain relief.

Questions: Manufacturer 1-800-871-7858 or www.koalatyproducts.com

 

Features:

The InTENSity™ Twin Stim®III combines Tens and EMS therapy in one beautiful digital device. The Tens has 4 Modes (Burst, Normal, Mod1, Mod 2) and the EMS has 3 modes (Synchronous, Asynchronous and Delay). This device is an industry leading 105mA. The Twin Stim®III comes standard with an AC Adapter and is easy to operate.

  • Wave Form:
    • Tens - Monophasic Square
    • EMS - Biphasic/monophase square wave pulse
  • Pulse Rate:
    • Tens - 1-150 Hz
    • EMS - 1-150 Hz
  • Pulse Width:
    • Tens - 50-300us
    • EMS - 50-300us
  • Output Voltage:
    • Tens - Constant Current
    • EMS - Constant Current
  • Current:
    • Tens - 0-105mA
    • EMS - 0-105mA
  • Modes:
    • Tens - 4
    • EMS - 3
  • Timer:
    • Tens - 1-60 Constant
    • EMS - 1-60 Constant

Uses:

  • Relaxation of muscle spasms
  • Prevention of muscle retardation of disuse atrophy
  • Increasing local blood circulation
  • Muscle re-education
  • Immediate post-surgical stimulation
  • Maintaining or increasing range of motion

Package Includes:

  • Stimulator
  • Lead Wires (New FDA compliant)
  • 4 Self-stick Hypoallergenic Reusable Electrodes
  • Battery
  • Carrying Case
  • Instruction Booklet

Directions:

  • Clean the skin thouroughly
    • Proper skin care will help make your IF program more comfortable and trouble-free.
  • Check Battery
    • Be sure you are using a fresh battery
    • A/C hook-up is preferred and battery is for short term emergency care only.
  • Prepare Electrodes
    • Follow the instructions included in the electrode pads you choose
  • Connect The Electrodes to the Lead Wires
  • Place Electrodes on Skin
    • Apply the electrodes to the exact site indicated by your physician following the instruction included with the electrode system. Make sure that the electrodes are placed firmly to the skin making good contact between the skin and the electrodes.
  • Connect Lead Wires to the Output Sockets
    • The InTENSity Select Unit is supplied with two twin lead wires. When applying only one pair of electrodes, plug the dual connector into the socket "Channel 2" and the electrode switch is set in the "Two Electrodes" position. Use both sockets when applying two pairs of electrodes.

Koalaty Products, Inc.
P.O. Box 320542
Tampa, Florida 33679
©Koalaty Products www.KoalatyProducts.com