Galvanic Ultra-G Digital Galvanic Unit High Voltage Pulsed Galvanic Stimulator
- Electric myostimulation has proven its high value as a method
of pain therapy and is a great help to the experienced therapist.
- The unit is a Dual Channel Electric Stimulator for active
treatment application, which is equiped with a Liquid Crystal
Display indicating operation modes and output as well as an
8-bit micro computer for controlling the system.
- The electronic of the unit create electric impulses can be
adjusted through the button or knob.
- The High Voltage Pulsed Galvanic Stimulator has a "twin
peaked monophasic waveform with fixed interpulse intervals of
100 us. Each pulse is much shorter in duration and can achieve
much hihger voltage than conventional stimulator.
Galvanic stimulation is most useful in acute injuries associated
with major tissue trauma with bleeding or swelling. In contrast
to TENS and IFC units, which apply alternating current, galvanic
stimulators apply direct current.
High-voltage Pulsed Galvanic Stimulation (HVPGS) is being used
for wound healing, edema reduction and pain relief carpal tunnel
syndrome and diabetic neuropathy are examples of where galvanic
stimualation is used.
Direct current creates an electrical field over the treated area
that, theoretically, changes blood flow. The positive pad behaves
like ice, causing reduced circulation to the area under the pad
and reduction in swelling. The negative pad behaves like heat,
causing increased circulation, reportedly speeding healing. The
Galvanic Stimulator (direct current) is the best modality for
iontophoresis treatments and comes with 5 year warranty against
mechanical defects.
View the full operations manual:
Galvanic Ultra-G Instruction Manual
Questions: Manufacturer
1-800-871-7858 or www.koalatyproducts.com
|
| Features:
Technical Specifications:
- Channel: Single channel. Two active outputs
and one dispersive return. Where active 1 and dispersive located
on the output of CH1, the active 2 located on the output of
CH2.
- Output Votage: Adjustable, 0-350 volts max.
- Pulse Rate: 1Hz - 120Hz (adjustable), 1Hz/step
- Pulse Duration: 5 us.
- IntraPulse Interval: 100 us.
- Software Pamp Up: Change mode or A mode,
the output will reset to zero then ramp up to its original setting
intensity. It protects users from sudden surge. Shows modes,
pulse rate, and low battery.
Directions:
- Prepare the skin
- Prepare the skin according to instuctions provided with
your electrodes. Before attaching electrodes, identify the
area in which your physician/practitioner has recommended
for electrode placement.
- Connect lead wires to the electrodes
- Connect the lead wires to the electrodes before applying
the electrodes to the skin.
- Place electrodes on skin
- Place electrodes on the skin as recommended by your physician.
- Insert lead wire connector to device
- Plug end of lead wire into the channel output receptacle
to be used, pushing plug in as far as it will go.
- Adjusting channel intensity control
- Locate the intesity conrol knob at the top of the unit.
Slowly turn the intensity control knob for channel 1 clockwise
until you reach the intensity recommended by your medical
professional. Always start with the lowest step and increase
slowly.
Full instruction manual in PDF format:
Package Includes:
- High Voltage Pulsed Galvanic Stimulator Unit
- 2 Pair of Lead Wires (pin style)
- 4 Self-Stick Hypoallergenic pre-gelled re-usable TENS Electrodes
- 9V Battery
- Hard Plastic Carrying Case
- Sturdy belt clip
- Built-in Timer for compliance
- Instruction Booklet
- 1 Year Manufacturers Warranty
- Optional Items: Conductive Electrode Prep Spray (prolongs
electrode life), Recharger and Rechargable Battery, Extra Electrode
Pads.
Note: With proper care, electrodes can be reused for over 20
applications. We recommend purchasing Pre-TENS electrode spray,
additional electrodes and rechargeable batteries with your tens
unit.
Warnings:
- The device must be kept out of reach of children.
- The safety of device for use during pregnancy or delivery
has not been established.
- Do not place electrodes on front of throat. This may result
in spasms of the laryngeal and pharyngeal muscles.
- Do not place the electrodes over the cartoid nerve.
- The device is not effective for pain of central origin. (headaches)
- The device may interfere with electronic monitoring equipment
(such as ECG monitors and ECG alarms).
- Electrodes should not be placed over eyes, in the mouth, or
internally.
- These devices have no curative value.
- These devices should be used only under the continued supervision
of a physician.
- The device is a symptomatic treatment and as such suppresses
the sensation of pain which would otherwise serva as a protective
mechanism.
Precautions/Adverse Reactions:
- Isolated cases of skin irritation may occur at the site of
electrode placement following long-term application.
- Stimulation should be stopped and electrodes removed until
the cause of irritation can be determined.
- Effectiveness is highly dependent upon patient selection by
a person qualified in the management of pain patients.
- If the device treatment become ineffective or unpleasant,
stimulation should be discontinued until reevaluation by a physicaian.
- Always turn off the device before applying or removing electrodes.
- Skin irritation and electrode burns are potential adverse
reactions.
Koalaty Products, Inc.
P.O. Box 320542
Tampa, Florida 33679
©Koalaty Products www.KoalatyProducts.com |
|