Product Description

TENS Unit Silver Electrodes 1.75x3.75" Rectangle, Tan Mesh Backing
Silver-coated, solid-carbon, cloth mesh-backed electrodes.

You simply cannot buy a better TENS Unit Electrode!

"Prewired" Reusable Self-Adhering Electrodes For Electrotherapy Stimulation

Superior silver-coated electrodes deliver more current with better distribution accross the entire pad.
Molded wire connector for reliability and durability.
Flexible solid-carbon pad for maximum charge delivery and comfort.
White Cloth-Mesh backing for comfort and durability.
US made high-stick Ludlow Gel for up to 15-20 uses.

Questions: Call Manufacturer at 1-800-201-3958 or Visit: www.leadlok.com

Features:

Shown here are the results of a Dispersion Meter Test

An electrical current is passed through each electrode for a period of 60 seconds. The electrical voltage output is identical for each electrode. The blue/green color shows the current being dispersed through the electrodes. Because of Lead-Lok's uniques manufacturing process, PMI electrodes are able to fully disperse the electrical current accross the entire surface of the electrode.

We also use copper lead wires with special heads that help promote greater dispersion and prevent wire pull out. Finally, we use only the finest gel on the market today for greater reusablity and superior performance. You simply cannot buy a better TENS Unit Electrode!

Directions:

Clean and dry application site as needed.
Open the pouch. Save pouch.
Remove electrode from package and peel electrode away from release sheet. Save relese sheet.
If electrode seems dry, add a few drops of water to moisten.
Place electrode on exact skin location (this should be determined by a licensed practitioner or therapist).
Apply finger pressure to electrode edge and lightly press entire electrode to assure adequate contact with patients skin.
Attach electrode lead wires to electrical stimulator/therapy device.

Removal and Storage:

Turn off electrical stimulator.
Disconnect lead wire from electrode(s).
Remove electrode from patient by lifting edge of electrode, not by wire.
For storage, replace electrode on release sheet and into pouch. Re-seal package, and store at room temperature.

Warnings:

Discontinue use and notify licensed practitioner or therapist if rash develops.
Electrode size, shape, and type may effect the safety and effectiveness of treatment. Using and electrode size or shape not recommended by the device manufacturer or your practitioner may result in thermal burning.

Federal law requires sales to be by or on the order of a licensed practitioner or therapist.

Other Information:

Electrodes should be replaced periodically when they lose their adhesive quality.